GETDD Welson Chemical Ltd.
Main products:stain remover,detergent,washing powder,muiti-purpose detergent,sanitizer
Products
Contact Us
  • Contact Person : Ms. Lei Ann
  • Company Name : GETDD Welson Chemical Ltd.
  • Tel : 86-20-61715206
  • Fax : 86-20-82974639
  • Address : Guangdong,Guangzhou,No.71 Xinzhuang 2 Lu,Yonghe Economic Zone of Getdd,Guangzhou,China SKYPE: xiaoyaoxiaoxie44,
  • Country/Region : China
  • Zip : 511356

Liquid Scale Remover

Liquid Scale Remover
Product Detailed
1. shipboard cleaner, 2.liquid scale remover, 3.save time and money, 4.quick penetration into deposits, 5.OEM is available/ Welson Descale-IT  Liquid Scale remover

DESCRIPTION

A liquid scale remover for cleaning heat exchange surfaces of deposits that impair efficiency. The use of Welson Descale IT eliminates costly down time and expensive manual descaling. Welson Descale IT contains a surfactant for quicker penetration into deposits. The inhibitor contained in Welson Descale IT prevents any serious attack on the base metal after solution of heat exchanger deposits is complete.

DIRECTIONS

For general descaling of heat exchanger units, boilers, evaporators, etc., mix 60 liters of Welson Descale IT to every 100 liters of water required to fill the system. The solution should be heated to 54°C. (130°F) for best results. Circulate the solution through the heat exchanger by use of a pump, or agitate the solution by bubbling steam or air through the exchanger. If steam is used for agitation, the steam should be discontinued when the temperature of the solution reaches 71°C. (160°F). Higher temperatures reduce the effectiveness of the inhibitor. System should be ventilated to the atmosphere at all times during cleaning.

When cleaning operation is completed, the system should be flushed thoroughly with fresh water. An alkaline solution, such as Welson AC, etc., should then be circulated to passivate the metal surfaces.

APPLICATIONS

Cleaning and descaling marine equipment, air-conditioning condensers, evaporators, boilers, condensers, Butterworth heaters and other heat exchangers. 

PRECAUTIONS

As in working with any acid, precaution should be exercised to avoid prolonged contact with skin. If contact is made with eyes, flush with water and seek medical attention. See additional precautions on drum label.

SPECIFICATIONS

Form: A clear, yellow liquid.

Composition: An inhibited inorganic acid.

Flash Point: None.

Stability: Stable after repeated freeze-thaw cycle.

Specific Gravity: 1.15

Liquid Scale Remover



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.